Manufacturer | Description | Minimum Billing | Freight Prepaid | Return Policy | Areas |
---|---|---|---|---|---|
Atkore CalbriteAtkore's Calbrite® manufactures stainless-steel systems for harsh and corrosive environments. They include stainless conduits, elbows, nipples, fittings, struts, device boxes, covers, cord grips, explosion-proof fittings, and accessories.
Our products are ideal for a number of applications. Here are some examples:
|
$250 | Conduit: $5,500; Stainless Steel Fittings: $1,000; Steel Fittings: $750 | Contact AGS | Arizona, Las Vegas, El Paso, New Mexico | |
Atkore CalbondAtkore's Calbond products include PVC-coated conduits, fittings, and accessories to protect electrical systems in highly corrosive environments. Our products are UL Listed and ETL Certified to perform in extreme conditions. The conduit bodies have 2 mm urethane inside and a 40 mm PVC coating on the exterior. All fittings incorporate flexible overlapping sleeves, ensuring a tight seal at every connection.
Our products are used in a number of applications, such as:
|
$250 | Conduit: $5,500; Fittings: $1,000; Co-Load: 8,000 lbs with Heritage | Contact AGS | Arizona, Las Vegas, El Paso, New Mexico | |
Atkore FRE CompositesHaving manufactured fiberglass products since 1958, Atkore's FRE Composites is focused exclusively on the design, engineering, and production of composite filament-wound fiberglass conduit products and accessories that serve the electrical, utility, telecom, wastewater, data center, utility, transportation, commercial, and industrial markets.
Critical for Infrastructure:
|
$250 | Fittings $10,000; Conduit $35,000 | Contact AGS | Arizona, Las Vegas, El Paso, New Mexico | |
Atkore Heritage Plastics
|
$250 | Conduit: 10,000 lbs; Fittings: $2,500; Co-Load: 8,000 lbs with Calbond | Contact AGS | Arizona, Las Vegas | |
Atkore HDPE ConduitHDPE conduit is corrosion resistant, lightweight, and flexible. It's available in smooth solid wall continuous lengths with moisture proof and water tight properties. HDPE conduit also has a high tensile and compression strength. Cable-in-Conduit (CIC) is HDPE conduit tailored to specific project specs with preinstalled cables of your choice. This integrated system streamlines power and communications projects, boosting efficiency and ensuring maximum cable protection. CIC consists of smooth, solid-wall, continuous length HDPE conduit with pre-installed cable components for Service Drops, Fiberoptics, Coaxial Cable, 600 Volt Al, 600 Volt Cu, and Medium Voltage.
|
$100 | Contact AGS | Contact AGS | Arizona, Las Vegas, New Mexico, El Paso | |
Cablofil / PW Industries (Legrand)
|
$0 | $7,000 | 35% | Arizona, El Paso, Las Vegas, New Mexico | |
Edwards Signaling
|
$0 | $500 | 20% | Arizona, El Paso, Las Vegas, New Mexico | |
Federal Pacific
|
$0 | $1,000 | 25% | Arizona, El Paso, Las Vegas, New Mexico | |
Galvan Electrical
|
$125 | Ground Rods & Fittings $3,500, Connectors $125 | 25% | Arizona, El Paso, Las Vegas, New Mexico | |
Kidde
|
$100 | $1,000 | 20% | Arizona, El Paso, Las Vegas, New Mexico | |
On-Q (Legrand)
|
$100 | $1,000 | 25% | Arizona, El Paso, Las Vegas, New Mexico | |
Pass & Seymour (Legrand)
|
$750 - Cornerstone | $2,500; $1,250 - Cornerstone | 25% | Arizona, El Paso, Las Vegas, New Mexico | |
Picoma Industries – A Division of Zekelman Industries
|
$100 | $1750 | Contact AGS | Arizona, El Paso, Las Vegas, New Mexico | |
Southwire
|
Contact AGS | Contact AGS | Contact AGS | Arizona, Las Vegas, El Paso, New Mexico | |
Southwire Engineered Products & Assembled Solutions
|
Contact AGS | Contact AGS | Contact AGS | Arizona, Las Vegas, El Paso, New Mexico | |
Unity Manufacturing
|
$100 | Contact AGS, All 10-foot gutter orders are plus freight | 20% | Arizona, El Paso, Las Vegas, New Mexico | |
Western Tube – A Division of Zekelman Industries
|
$500 | 10,000 lbs steel/2,000 lbs aluminum conduit | Contact AGS | Arizona, El Paso, Las Vegas, New Mexico | |
ZI Strut – Western Tube – A Division of Zekelman IndustriesManufactured right here in the USA, ZI-Strut is cold-formed from hot-rolled, structural grade carbon steel. Our high-quality, American-made strut is complemented by a complete line of accessories that are available in all finishes and materials, including 304 and 316 stainless steel.
|
Contact AGS | Arizona, El Paso, Las Vegas, New Mexico | |||
Wiremold (Legrand)
|
$0 | $1,250; $5,000 (Custom) | Contact AGS | Arizona, El Paso, Las Vegas, New Mexico |